WOODline – Parquet coverings

Oak	Steamed Beech	Bright Beech
Black Cherry	Steamed Bamboo	Ash
Olive ash	Hard Maple	Jatoba
Smoked Oak	Walnut	Teak

Description

The floor has always been an essential presentation element of a highquality room. Whether it is in a conference room or a modern office, a parquet floor covering always provides a harmonious residential or working environment. Hyperline parquet floors are produced from solid wood and meet the highest standards of quality; which means that they are particularly long-lasting and comfortable to walk on. NORTEC, LIGNA and FLOOR and more panel types can be bonded to ready-made parquet panels. WOODline offers a large selection of designs and types of wood. Lacquered surfaces boast the following advantages: Lacquered hard surface A high degree of resistance to abrasion Easy to care for Adjustable gloss rate Resistant to bacteria and micro-organisms Oiled surfaces boast the following advantages: Easy to care for Damage can be repaired Ecologically safe Natural surface structure is maintained

Types of wood

Oak, smoked oak, ash, olive ash, merbau, walnut, maple, light beech, steamed beech, bamboo, steamed bamboo, cherrywood, jatoba and teak. The wood types listed are only a small sampling of our offerings. Additional types of wood are available on request.

Wear-proof lacquered surface Parquet layer Access floor panel Panel edging Panel lower coating

Types of designs
Customized designs are available on request

Classical parquetry

Custom parquetry

WOODline Access Flooring

Description

The factory-applied LIGNA and NORTEC raised floor panels offer decisive advantages. The 4 mm (0.16”) parquet panel is joined to the carrier panel at the factory. Complete quality assurance guarantees optimum joining of the floor panel to the parquet. An edge trim color-coordinated to the type of wood being used is run up to the surface, making it easy to open and close the raised floor panel. The surface of the parquet panel can be waxed, oiled or varnished.

Surface Lacquer, wax, oil Parquet layer High-quality hardwood panels in various types of designs and woods Supporting panel Raised floor panel made of high density chipboard material or calcium sulphate Edge trim Color-matched to the type of wood. It is run up to the surface to protect the edge of the panel Barrier layer Counter surfacing made of aluminum or steel sheet as humidity barrier and/or to increase loading

FLOOR and more WOODline

Description

Probably the most cost-effective alternative to screed and parquet flooring is factory-bonding parquet panels to the FLOOR and more dry flooring system. Seamless parquet surfaces are produced with dry construction in just a few days; the ideal solution for quick constructions. The calcium sulphate panels are bonded to form a seamless floor surface. The pre-polished wooden panels are then expertly processed for surface coating, and sealed with oil, wax or varnish. With this system, there is no need to coordination between a screed flooring installer and a parquet installer.

Surface Pregrinded wooden surface, ready to receive lacquer or oil finishes Parquet layer High-quality hardwood panels with various types of designs and woods Supporting panel Calcium sulphate panel with profiled edges Barrier layer Counter surfacing made of aluminum as humidity barrier