February's Product of the Month

Technical Characteristics

Meet TIA/EIA-568-A Category 5e requirements.
Meet TIA/EIA TSB-40
Meet ISO/IEC Generic Cabling Standard 11801
Meet CENELEC Generic Cabling Standard EN50173
IDC: PC UL94V-0, accepts 22-26 AWG Solid Wire
PCB: FR-4 1.6 mm (0.062") thick, 2 layers
Contact: 0.45 mm (0.018") in diameter, phosphor and bronze with 1.27 micron (50 microinches) gold sputtering

Don’t forget to take advantage of our promotion for Orders over $5,000 will receive up to a $500 instant rebate on shipping Orders over $10,000 will receive up to a $1,000 instant rebate on shipping.

<< More Here

How to Mount a Category 5e Horizontal Keystone Jack

Step 1

Prepare HYPERLINE Keystone Jack RJ-45, Category 5e, horizontal type (180°) and the necessary tools for termination.

You will need:

HYPERLINE Keystone Jack RJ-45, Category 5e, horizontal type (180°);
HYPERLINE stripper and cutter HT-501;
Impact punch down tool HT-3140(HT-314B);
HYPERLINE twisted pair cable UTP, Category 5e, 4 pairs, solid;
HYPERLINE plastic markers OM-8

Testing Guidelines for 10-Gbe over Twisted Pairs

by Hugo Draye
Courtesy of Cabling Installation & Maintenance Magazine

Certifying links for alien-crosstalk performance is more likely to be a sample process than a simple one.

The IEEE standards review board approved the standard for 10-Gbit/sec Ethernet over twisted-pair copper cabling (10GBase-T) on June 8, and we expect that the 802.3 standards docu­ments will be updated and published sometime this year.

<< Read More
Copyright Information