How to Terminate Fiber Optic Cable with Fiber Optic Adapter by Epoxy Method

Prepare everything that is necessary for termination. HYPERLINE HT-K3032 fiber optic termination tools can be used.

You will need:
HYPERLINE 4-conductor fiber-optic cable, indoor, multimode;
HYPERLINE SC-SC adapters, MM, simplex;
HYPERLINE fiber optic connectors, simplex SC-MM-0.9;
Carbide scribe;
Lint-free cloths;
Alcoholic solution for surface cleaning;
Polishing table with rubber coating;
Polishing disk;
TRA-CON epoxy Tra-Bond F123;
Syringe for epoxy;
Polishing paper 1 micron, 3 micron and 5 micron (or fiber optic termination kit HT-K3032).

HYPERLINE HT-223H fiber optic stripper for fiber diameter 125/250;
HYPERLINE HT-501 cable stripper and cutter;
HYPERLINE HT-C151 kevlar cutter.

Also you will need:
19" fiber optic termination box for 8 SC connectors with a draw-out splice-plate;
HYPERLINE nylon cable ties GT-140MC;
HYPERLINE marking labels WMB-1;
Spline screwdriver for mounting;
Connector heater with the integral heat controller;
Microscope.